WR6030WR 6030 ¾ Inch Threshold
Gelcoat Shower

Unit Dimension: 64" x 33.5" x 77.5"

This shower provides the contractor
with the following time and money-saving features:

  • 3/4" Front Outside Threshold
  • No Recess Needed - May be installed directly on top of floor
  • No Cement, Epoxy or Mortar Mix needed underneath the unit
  • This unit includes the Bootprint Base for maximum bottom floor support
  • No “Pit” needed for the drain – Front threshold is lowest point on product
  • No weights or bags of cement needed to secure the unit to the floor

With the WR 6030 there’s no need to:

  • Dig pit by drain
  • Purchase cement, mortar or epoxy kit
  • Carry material from the truck up into the bathroom
  • Mix materials
  • Apply materials to bottom of unit or backfill underneath the unit and hope that it will bond the unit with the floor
  • Add weights and/or bracing to the bottom floor of unit for 24 hours
  • Clean up mess and materials
  • Return next day to remove weights or bracing
  • Restock the weighting material or brace

You save a minimum of 2 hours labor and materials— plus the opportunity for mistakes. Before, if the mortar or epoxy didn’t hold the shower floor to the structure’s floor, you would’ve had a major water leakage problem. Now, those problems are gone!

| Measurements | Specifications | Mn. Code Compliance |