Specifications for Models: WR 6030-MN, WR 6030A-MN, WR 6030-B-MN, WR 6030-C-MN

Warm Rain Models WR 6030 bath fixtures are constructed of reinforced polyester resin covered with a high gloss gel-coat of 18-20 mils. thickness. The reinforced fiberglass a minimum content of 18% fiberglass.

The bottom base of the unit is constructed of end-grained balsa wood sandwiched between 2 layers of reinforced fiberglass at a content no less than 18%. The base is an integral part of the unit.

The outside dimensions of these units will measure 64" L x 33.5" W x 77 1/2" H .

The inside dimensions of these units will be 60” L x 30” W as measured at the centerline of the unit in accordance with the ADAAG / ANSI guidelines. The bottom floor is a textured bottom floor.

These units are reinforced for the future installation of grab bars and a fold-up seat.

Antibacterial additive is an option for this unit.

These Warm Rain Transfer showers arrive on site fully tested, inspected, and certified to meet or exceed the precise standards established by the FHA/HUD, materials bulletin 73), American National Standards Z-124.1 and Z-124.2, ASTM/E-84, and is certified by the NAHB (National Association of Home Builders).

(Over for Model Option Specifications)

Specifications for Models: WR 6030-MN, WR 6030-A-MN, WR 6030-B-MN & WR 6030-C-MN

WR 6030-A-MN: Models includes Grab Bars
The grab bars will be factory installed, the grab bars will be 1 1/2" outside diameter ADA compliant stainless steel bars. There are 2- 24" & 1-48" horizontal grab bars and 1-24" vertical grab bar . The wall reinforcement is wood fiberglassed into the unit. 1-24" grab bar on the wet wall will be placed 34.5" above the floor. 1-24" vertical grab bar will be placed 4" above the horizontal bar half way between the front of the unit and the middle of the wet wall. 1-48" grab bar on the back wall will be placed 34.5" above the floor. 1-24" grab bar will be placed opposite the wet wall at 34.5" above the floor.

WR 6030-B-MN: Models includes Grab Bars & Fold-up Seat
The grab bars will be factory installed, the grab bars will be 1 1/2" outside diameter ADA compliant stainless steel bars. There are 1- 24" & 1-36" horizontal grab bars and 1-24" vertical grab bar . The wall reinforcement is wood fiberglassed into the unit. 1-24" grab bar on the wet wall will be placed 34.5" above the floor. 1-24" vertical grab bar will be placed 4" above the horizontal bar halfway between the front of the unit and the middle of the wet wall. 1-36" grab bar on the back wall will be placed 34.5" above the floor. The ADA compliant seat will be factory installed. The seat will support a minimum of 250 #'s. The seat will be placed on the side wall opposite the controls 18" above the floor & cover the full depth of the stall. The seat is a rectangular white phenolic ADA compliant seat.

WR 6030-C-MN: Models includes Grab Bars, Fold-Up Seat, Pressure Balance Valve, Hand held Shower with Slide Bar, Vacuum Breaker, & Curtain Rod with Hangers
The grab bars will be factory installed, the grab bars will be 1 1/2" outside diameter ADA compliant stainless steel bars. There are 1- 24" & 1 -36" horizontal grab bars and 1-24" vertical grab bar. The wall reinforcement is wood fiberglassed into the unit. 1-24" grab bar on the wet wall will be placed 34.5" above the floor. 1-24" vertical grab bar will be placed 4" above the horizontal bar halfway between the front of the unit and the middle of the wet wall. 1-36" grab bar on the back wall will be placed 34.5" above the floor. The ADA compliant seat will be factory installed. The seat will support a minimum of 250 #'s. The seat will be placed on the side wall opposite the controls 18" above the floor & cover the full depth of the stall. The seat is a rectangular white phenolic ADA compliant seat. 1-Symmons Temptrol Valve & Kit model # S-25-300-B30-V-X-2000 will include a Temptrol 2000 pressure balance valve, Hand held shower with 30" bar, Vacuum breaker. Also, 1-Seachrome 5' Curtain rod with hangers will be included with the unit.

Warm Rain Corporation
P.O. Box 600 Hancock, MI 49930
Voice: 906-482-3750
Fax: 906-482-2585
E-mail: tedk@warmrain.com

| Back |