Specifications for Models: WR 6030, WR 6030-A, WR 6030-B & WR 6030-C

Warm Rain Models WR 6030 bath fixtures are constructed of reinforced polyester resin covered with a high gloss gel-coat of 18-20 mil. thickness. The reinforced fiberglass includes a minimum content of 18% fiberglass.

The bottom base of the unit is constructed of 1/2" end-grained balsa wood sandwiched between 2 layers of reinforced fiberglass at a content no less than 18%. The base is an integral part of the unit.

The outside dimensions of this unit will measure 64" L x 33.5" W x 77.5" H.
The inside dimension of the units will be 60” L x 30” W as measured at the centerline of the unit in accordance with the ADAAG/ANSI guidelines. The bottom floor is a textured bottom floor.

These units are reinforced for the future installation of grab bars and a fold-up seat.

Antibacterial additive is an option for this unit.

These Warm Rain Roll-in showers arrive on site fully tested, inspected, and certified to meet or exceed the precise standards established by the FHA/HUD, materials bulletin 73), American National Standards Z-124.1 and Z-124.2, ASTM/E-84, and is certified by the NAHB (National Association of Home Builders).

(Over for Model Option Specifications)

Specifications for Models: WR 6030, WR 6030-A, WR 6030-B & WR 6030-C

WR 6030-A: Models includes Grab Bars
The grab bars will be factory installed, the grab bars will be 1 1/2" outside diameter ADA compliant stainless steel bars. There are 2- 24" & 1-48" horizontal grab bars. The wall reinforcement is wood fiberglassed into the unit. 1-24" grab bar on the wet wall will be placed 34.5" above the floor. 1-48" grab bar on the back wall will be placed 34.5" above the floor. 1-24" grab bar will be placed opposite the wet wall at 34.5" above the floor.

WR 6030-B-: Models includes Grab Bars & Fold-up Seat
The grab bars will be factory installed, the grab bars will be 1 1/2" outside diameter ADA compliant stainless steel bars. There are 1- 24" & 1-36" horizontal grab bars. The wall reinforcement is wood fiberglassed into the unit. 1-24" grab bar on the wet wall will be placed 34.5" above the floor. 1-36" grab bar on the back wall will be placed 34.5" above the floor. The ADA compliant seat will be factory installed. The seat will support a minimum of 250 #'s. The seat will be placed on the side wall opposite the controls 18" above the floor. The seat is a rectangular white phenolic ADA compliant seat.

WR 6030-C: Models includes Grab Bars, Fold-Up Seat, Pressure Balance Valve, Hand held Shower with Slide Bar, Vacuum Breaker, & Curtain Rod with Hangers
The grab bars will be factory installed, the grab bars will be 1 1/2" outside diameter ADA compliant stainless steel bars. There are 1- 24" & 1 -36" horizontal grab bars. The wall reinforcement is wood fiberglassed into the unit. 1-24" grab bar on the wet wall will be placed 34.5" above the floor. 1-36" grab bar on the back wall will be placed 34.5" above the floor. The ADA compliant seat will be factory installed. The seat will support a minimum of 250 #'s. The seat will be placed on the side wall opposite the controls 18" above the floor & cover the full depth of the stall. The seat is a rectangular white phenolic ADA compliant seat. 1-Symmons Temptrol Valve & Kit model # S-25-300-B30-V-X-2000 will include a Temptrol 2000 pressure balance valve, Hand held shower with 30" bar, Vacuum breaker. Also, 1-Seachrome 5' Curtain rod with hangers will be included with the unit.

Warm Rain Corporation
P.O. Box 600 Hancock, MI 49930
Voice: 906-482-3750
Fax: 906-482-2585
E-mail: tedk@warmrain.com

| Back |