Dome Installation

  1. Place dome on unit. (VERIFY DOME COLOR MATCH BEFORE INSTALLATION)
  2. Make sure the face of the dome and the tub (or shower) are flush. Also make sure the nailing flanges of the dome and tub (or shower) are in line.
  3. Drill 1″ holes in 4 corners.
  4. Fasten with 1″ x 1″ bolts with flat washer on each side.

NOTE: The only area where the dome and the tub (or shower) are flush are right at the front pillars. The inside of the dome will overhang the tub (or shower) so that water will drop off the dome and into the unit itself.

1 piece units with domes – install dome first

Front-Fitâ„¢ breakdowns must be installed before dome