3/4" Front Outside Threshold ADA compliant Roll-in showers
Warm Rain’s ADA Compliant Roll-in Shower Complies with new ADAAG Guidelines and ICC/ANSI A117.1-2003 standard
608.2.2 for Roll-in shower with Inside Dimensions: 60” x 30” as measured at the centerline of the shower in accordance with
ADA guidelines.
3/4” Front Outside Threshold ADA compliant Transfer Showers
Warm Rain ADA Compliant Transfer Shower Complies with new ADAAG Guidelines and ICC/ANSI A117.1-2003 Standard
608.2.1 for Transfer shower with Inside Dimensions: 36” x 36” as measured at the centerline of the shower in accordance with
ADA guidelines.
 These Revolutionary Showers may be installed directly on top of slab floor with the following advantages over any other fiberglass
unit in the market:
- No Recess Needed – May be installed directly on top of the slab
- No cement, Epoxy or Mortar Mix needed underneath these units
- No “Pit” needed for the drain
- No weights, bags of cement or wood bracing needed to secure the unit
to the floor
- “BootPrint Base” for the strongest self-supporting base support the
plumbing industry has to offer
All of the above will save the Professional Plumbing Contractor from 2 – 4
hours of labor and installation time and material (and Money and Hassle)
over other brands
The ADA compliant Roll-in showers may be ordered with the following preset packages:
Base unit Reinforced only
“A” Package Base unit with three 24” grab bars
“B” Package Base unit with two 24” grab bars and fold-up seat
“C” Package ADA compliant unit includes “B” package plus pressure balance valve, hand held shower,
vacuum breaker and curtain rod
The ADA compliant Transfer showers may be ordered with the following preset packages:
Base unit Reinforced only
“A” Package Base unit with three 24” grab bars
“B” Package Base unit with two 24” grab bars and fold-up seat
“C” Package ADA compliant unit includes “B” package plus pressure balance valve, hand held shower,
vacuum breaker and curtain rod
For Minnesota Code units add “MN”. For the base package units will receive the reinforcement for a 24" vertical grab bar on
the wet wall.
The A, B and C packages will include a 24" vertical grab bar installed on the wet wall half way between the front of the unit and
the middle of the valve.
All units may be customized with additional accessories.
Model #: WR 3636-B-MN (Minnesota code version)
- Outside Dimensions: 40" x 40" x 77 ½"
- Inside Dimensions: 36" x 36" as measured at the centerline of the shower in accordance with ADA guidelines.
- Front Outside Threshold: ¾"
- No Recess, Pit or epoxy or mortar mix needed underneath these ADA compliant transfer showers
- “BootPrint Base” for the strongest base support the plumbing industry has to offer
|
