INSTALL DOME FIRST BEFORE TUB OR
SHOWER INSTALLATION

1. Place dome on unit. (VERIFY DOME COLOR MATCH BEFORE INSTALLATION)
2. If the dome was ordered with the unit, the holes will already be drilled. (Skip to step # 5)
3. Make sure the face of the dome and the tub (or shower) are flush. Also make sure the nailing flanges of the dome and tub (or shower) are in line.
4. Drill ¼" holes in 4 corners
5. Fasten with ¼" x 1" bolts with flat washer on each side.

NOTE: The only area where the dome and the tub (or shower) are flush are right at the front pillars. The inside of the dome will overhang the tub (or shower) so that water will drop off the dome and into the unit itself.

| Main | Products |